Fire prevention & investigations Origin-and-cause investigations

Fire Investigations New

Confidential origin-and-cause cases worked the way NFPA 921 lays out the method: guided scene steps, a numbered photo log, evidence with QR labels and signed custody, hypothesis testing, and a reviewed report.

  • Confidential per case
  • Signed chain of custody
  • Administrative and technical review
Why departments switch

What Fire Investigations fixes.

A case opens from the NERIS report or the Command Portal call and already knows the place: the preplan and its fire protection systems, inspection history and open violations, earlier fires at the address, and the weather at the time. Investigators work the scene step by step, log photos and evidence, interview people, and reach origin and cause by testing hypotheses. The report drafts itself from the record, goes through an administrative and a technical review, and is frozen as a PDF when approved. Only the people on a case can see it.

  • Gaps in the scene work stay visible
  • Every evidence hand-off signed
  • Paperwork drawn from one record
01

Starting every case from a blank page

A case opened from a NERIS report or a Command Portal call brings the address, the preplan, earlier fires there, and the weather at the time of the fire.

02

Scene work that skips steps

Structure, vehicle, outside, and explosion scenes each have their own steps. A step is done, or marked skipped or not applicable with a reason, so a gap shows in the file.

03

Custody gaps on evidence

Each item gets a number and a QR label, and every hand-off, to the lab and on to release, is signed on the device and kept as an entry that can’t be changed.

04

Calling a cause too early

A cause can be saved only when one hypothesis alone survives at probable, and an incendiary call can’t rest on every other cause being ruled out.

How it works

From setup to a record you can trust.

  1. Open the case

    Start from a NERIS report, a Command Portal call, or a blank case, and add the investigation team.

  2. Work the scene

    Take field notes, dictated or typed, photograph into the numbered photo log, and complete each scene step.

  3. Test and conclude

    Record evidence, people, and interviews, test origin and cause hypotheses, and set the classification.

  4. Report and close

    Draft the report from the record, send it through review, approve it into a frozen PDF, and share it with a prosecutor if needed.

Capabilities

Everything Fire Investigations includes.

Knows the place

The preplan and its fire protection systems, inspection history, open violations and permits, earlier cases at the address, and weather readings.

Guided scene steps

Steps for structure, vehicle, outside, and explosion scenes, each tied to an investigator duty in NFPA 1033, with preplan answers offered to confirm.

Photo log and phone uploads

Numbered photos that keep the time the camera recorded, and a QR link that sends photos from an investigator’s own phone straight to the case.

Evidence and custody

QR labels, signed hand-offs, lab requests, an evidence room view, legal hold, and a retention schedule that flags items due for release or destruction.

People and interviews

People kept once across cases, and interviews planned, then summarized and evaluated, with rights advisements noted and recordings attached.

Hypothesis testing

Origin and cause hypotheses tested against the data, refuted ones kept with the reason, and a check before any classification is saved.

Report and review

Drafted from the record and rewritten where the author chooses, reviewed by someone other than the author, then frozen as a PDF. Later changes are supplements.

Paperwork and sharing

Lab request, custody record, evidence receipt, consent and statement forms, scene release, a whole-case download, and expiring read-only links for outside agencies.

Part of one portal

Works with the rest of your department.

Members keep one secure sign-in and one set of role permissions across every module you turn on.

Turn on when you need itRole-based permissions
Questions

Fire Investigations FAQ

Who can see a case?

Only the members on its team, and supervisors who can see every case. Anyone else gets no sign that the case exists, and supervisors can see who has opened each one.

Is it certified to NFPA 921, 1033, or 1321?

No. It follows the method NFPA 921 lays out, its scene steps follow the duties NFPA 1033 lists, and reports go through the administrative and technical review NFPA 1321 describes. Qualifying investigators and meeting those standards stay with the department.

Does it update the NERIS report?

If the case is linked to a NERIS report that is still with its author, the investigator can send over the cause, that a fire investigator investigated, and whether more investigation is needed. Once the report is with its reviewers or sent, the case can’t change it.

Can an outside agency see the case?

A member with the sharing permission can send a prosecutor, another agency, or the State Fire Marshal a read-only link. It shows only what the investigator chose, lasts 7, 30, or 90 days, and can be stopped at any time.

See Fire Investigations with your department’s workflow.

Tell us how you handle this work today. We’ll walk you through it in the full Station Clipboard portal.

Need something we don’t have yet? We build custom modules.